SWIT Electronics S-4913R - Manual (Page 7)

4. System Connection
1. Check the match codes on the products. The S-4913T and S-4913R with same match codes are allowed to
transmit. (For example: match the S-4913T with “TRANSMITTER ***801” code and the S-4913R with
“RECEIVER ***801” code.)
2. Connect the HDMI video source with the “HDMI” port of S-4913T transmitter.
3. Connect the “SDI OUT” port of S-4913R receiver with SDI monitor or receiving devices.
4. Power on the S-4913T and S-4913R by battery or DC cable, and the system will search wireless connection
automatically, and display OSD as Pic (1).
5. After 10-20 seconds, the wireless will be connected and the receiver will display OSD as Pic (2).
Pic (1) Pic (2)
Recommended antenna position:
To ensure the transmission efficiency, it is recommended to set the antennas at different angles.
See Pic (3) and Pic (4).
Pic (3) Pic (4)