Syba SD-UEN-525 - Manual (Page 5)

Step 3: Put the top cover of the 5.25” enclosure back in place and secure the
enclosure with screws as shown in diagram.
Step 4: Connect the appropriate cables to the 5.25’’ enclosure. Make sure the
polarity of the AC-DC 12VDC power supply is correct. If the polarity is not correct,
you can damage the electronic section of the 5.25’’ enclosure.
Note for Combo version:
You can only connect the 5.25” enclosure to one interface at the same time. If you
choose to use the USB 2.0 interface, you can not use the IEEE 1394a
interface or vice versa.
5