Syba SD-UEN-5SL - Manual (Page 9)

After securing the CD/DVD device or hard drive, you can cover the
screw or screw hole using the rubber sheet provided.
Connect the appropriate cables to the 5.25” enclosure. Make sure
the polarity of the AC-DC 12VDC power supply is correct. If the
polarity is not correct, you can damage the electronic section of the
5.25” enclosure.
SOFTWARE INSTALLATION
Note: This software installation section assumes that your
computer system already has USB 2.0 or Firewire 1394a
ports available for connecting the 5.25” enclosure and all the
appropriate drivers have been property installed.
A. Installing USB 2.0 driver (For USB 2.0 version)
For Windows 98/98SE
Windows 98/98SE does not include a USB Mass Storage
driver so you need to install Windows 98/98SE driver. The
driver is located in \Prolific\PL2506_2507 directory of the
Driver CD.
For Windows ME, 2000 & XP