Syba IEEE 1394A + USB 2.0 - Manual (Page 4)

What is in your package?
You should have the following items in your package;
•
One VIA IEEE 1394A + USB 2.0 Combo card
•
One User Manual
•
One Driver Installation CD
Optional Accessories
•
Ulead Video Studio 5.0
•
One IEEE 1394A cable
Installing the VIA IEEE 1394A + USB 2.0 Combo card
Installing this VIA IEEE 1394A + USB 2.0 Combo card to
your computer is simple, just simply follow these steps.
•
Turn off your computer and all external devices connected
to it.
•
Disconnect your computer from the power sources.
•
Open the computer case. Refer to your computer user
manual for more details.
•
Find an available PCI slot and remove the slot bracket.
Save the bracket screw for later use.
•
Align the combo card horizontally with respect to the PCI
slot and insert it into slot firmly and evenly. Take care not
to force it into the slot. Once you have properly positioned
the combo card into slot, fasten it to the computer case
with the bracket screw you have saved.
•
Secure the computer case and switch on your computer.
Driver Installation
You need to install three types of driver before the combo
card function properly.
1. 1394 Bus Controller driver
2. VIA PCI to USB Open Host Controller driver
3. VIA PCI to USB Enhanced Host Controller driver