Syba IEEE 1394A + USB 2.0 - Manual (Page 5)

For Windows 98/98SE/ME/2000 & XP Operating System
Note: Make sure you have your Microsoft Windows O/S
Installation CD ready before installing this IEEE 1394A + USB
2.0 Combo card.
1.
Installing 1394 Bus Controller driver
This combo card is compliant to IEEE 1394 OpenHCI
Specifications and compatible with Microsoft OHCI, DV
and SBP-2 driver in Windows 98, Windows 98SE,
Windows ME, Windows 2000 and Windows XP operating
system. Full driver support by Microsoft OpenHCI based
drivers, no additional driver required. Simply have your
Windows O/S Installation CD ready when Windows
Installation prompts for the location of the driver.
2. Installing VIA PCI to USB Open Host Controller
driver
Windows should detect three “VIA PCI to USB Open
Host Controller”, no additional driver required. Full driver
support by Microsoft OpenHCI based driver. Simply have
your Windows O/S Installation CD ready when Windows
Installation prompts for the location of the driver.
3. Installing VIA PCI to USB Enhanced Host Controller
driver
Installing Windows XP driver
For Windows XP, you can use Microsoft EHCI driver for
Windows XP or install VIA EHCI driver we provided
with this card.