Syba SD-U2HUB-4 User Manual
Page 4
4
5.
Check all the connections before replacing the computer cover and
reconnecting the power cord.
6.
Switch on your computer and start Windows.
7.
Windows should detect the Hub Bay and automatically install the
appropriate drivers for your USB 2.0 Hub Bay.
8.
You have now finished installing your Hub Bay.
Connecting USB Devices to the Hub Bay
Simply plug the cable from your USB devices into any available port on the
Hub Bay. If the Hub Bay detect the USB devices, a ’Green’ LED will light up
indicating that the USB device is working.
Note: The first time you connect a USB device to the system. Windows will
detect the USB device and prompt you to install the driver for your USB
device. Follow the instructions in the User Manual that came with your USB
device to complete this process
USB 2.0 Hub Bay LED Indicators
1.
Power indicator(Red LED)
When this LED is on, there is power supplying the USB2.0 Hub Bay.
2.
Port indicators (Green LED)
There are four Port indicators on the USB 2.0 Hub Bay. When LED is
on, the USB device connected to the USB port on the USB 2.0 Hub Bay
is functioning properly.
P/N:5019750351040