tekmar 741 Actuating Motor - Manual (Page 2)

Limited Warranty The liability of tekmar under this warranty is lim-
ited. The Purchaser, by taking receipt of any tekmar product (“Prod-
uct”), acknowledges the terms of the Limited Warranty in effect at
the time of such Product sale and acknowledges that it has read
and understands same.
The tekmar Limited Warranty to the Purchaser on the Products sold
hereunder is a manufacturer’s pass-through warranty which the
Purchaser is authorized to pass through to its customers. Under
the Limited Warranty, each tekmar Product is warranted against
defects in workmanship and materials if the Product is installed and
used in compliance with tekmar’s instructions, ordinary wear and
tear excepted. The pass-through warranty period is for a period of
twenty-four (24) months from the production date if the Product is
not installed during that period, or twelve (12) months from the docu-
mented date of installation if installed within twenty-four (24) months
from the production date.
The liability of tekmar under the Limited Warranty shall be limited to, at
tekmar’s sole discretion: the cost of parts and labor provided by tekmar
to repair defects in materials and/or workmanship of the defective prod-
uct; or to the exchange of the defective product for a warranty replace-
ment product; or to the granting of credit limited to the original cost of the
defective product, and such repair, exchange or credit shall be the sole
remedy available from tekmar, and, without limiting the foregoing in any
way, tekmar is not responsible, in contract, tort or strict product liabil-
ity, for any other losses, costs, expenses, inconveniences, or damages,
whether direct, indirect, special, secondary, incidental or consequential,
arising from ownership or use of the product, or from defects in work-
manship or materials, including any liability for fundamental breach of
contract.
The pass-through Limited Warranty applies only to those defective Prod-
ucts returned to tekmar during the warranty period. This Limited War-
ranty does not cover the cost of the parts or labor to remove or transport
the defective Product, or to reinstall the repaired or replacement Product,
all such costs and expenses being subject to Purchaser’s agreement and
warranty with its customers.
Any representations or warranties about the Products made by Purchaser
to its customers which are different from or in excess of the tekmar Lim-
ited Warranty are the Purchaser’s sole responsibility and obligation. Pur-
chaser shall indemnify and hold tekmar harmless from and against any
and all claims, liabilities and damages of any kind or nature which arise
out of or are related to any such representations or warranties by Pur-
chaser to its customers.
The pass-through Limited Warranty does not apply if the returned Prod-
uct has been damaged by negligence by persons other than tekmar,
accident, fire, Act of God, abuse or misuse; or has been damaged by
modifications, alterations or attachments made subsequent to purchase
which have not been authorized by tekmar; or if the Product was not
installed in compliance with tekmar’s instructions and/or the local codes
and ordinances; or if due to defective installation of the Product; or if the
Product was not used in compliance with tekmar’s instructions.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, WHICH THE GOVERNING LAW ALLOWS PARTIES TO
CONTRACTUALLY EXCLUDE, INCLUDING, WITHOUT LIMITATION,
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE, DURABILITY OR DESCRIPTION OF THE
PRODUCT, ITS NON-INFRINGEMENT OF ANY RELEVANT PATENTS
OR TRADEMARKS, AND ITS COMPLIANCE WITH OR NON-VIOLA-
TION OF ANY APPLICABLE ENVIRONMENTAL, HEALTH OR SAFETY
LEGISLATION; THE TERM OF ANY OTHER WARRANTY NOT HEREBY
CONTRACTUALLY EXCLUDED IS LIMITED SUCH THAT IT SHALL NOT
EXTEND BEYOND TWENTY-FOUR (24) MONTHS FROM THE PRODUC-
TION DATE, TO THE EXTENT THAT SUCH LIMITATION IS ALLOWED BY
THE GOVERNING LAW.
Product Warranty Return Procedure All Products that are believed to
have defects in workmanship or materials must be returned, together
with a written description of the defect, to the tekmar Representative
assigned to the territory in which such Product is located. If tekmar
receives an inquiry from someone other than a tekmar Representative,
including an inquiry from Purchaser (if not a tekmar Representative) or
Purchaser’s customers, regarding a potential warranty claim, tekmar’s
sole obligation shall be to provide the address and other contact informa-
tion regarding the appropriate Representative.
Product design, software and literature are Copyright ©2014 by
tekmar Control Systems Ltd., A Watts Water Technologies Company 2 of 2 All specifications are subject to change without notice.
Printed in Canada. 741_D - 03/14.
tekmar Control Systems Ltd., A Watts Water Technologies Company. Head Offi ce: 5100 Silver Star Road,
Vernon, B.C. Canada V1B 3K4, 250-545-7749, Fax. 250-545-0650 Web Site: www.tekmarControls.com
Limited Warranty and Product Return Procedure
Actuating Motor 741 Floating Action
Literature — 741_D
Packaged Weight — 1.2 lb. (520 g)
Enclosure — Blue PPO plastic
Approvals — CSA C US, CSA/UL 61010-1
Ambient conditions — Indoor use only, 32 to 122°F (0 to 50°C)
RH 90%, Altitude <3000 m,
Installation Category I, Pollution Degree 2
Power Supply — 24 V (ac) ±10%, 60 Hz
Control signal — 24 V (ac), floating action, 1.5 VA
Angle of rotation — Electrically limited to 90° shaft rotation
Running time — 105 seconds at 60 Hz
Maximum torque — 6 N•m (53 in•lbs)
Technical Data
Replacement Parts and Accessories
Mixing Valve Types Size Anti-rotation bolt size Coupler Arrow Color
Danfoss or ESBE 3MG 1/2" through 1-1/4" Small White
Danfoss or ESBE 4MG 1/2" through 1-1/4" Small Red
Danfoss or ESBE G1 series 1-1/2" through 2" Large White
Danfoss or ESBE G4 series 1-1/2" through 2" Large Red
Actuating Motor Handle Kit M3045 includes: • One hand wheel with red indicator stripe, One screw with screw
adaptor.
Coupling Kit M3046 includes: • One replacement coupler with white arrow, One replacement coupler
with red arrow, Two replacement anti-rotation bolts.
Actuating Motor Adaptor Kit M3048 includes: • Two pairs of anti-rotation bolts that allow the Actuating Motor 741 to
mount onto the following mixing valves: