Teradek Beam User Manual
Page 14
© 2 0 1 4 . T e r a d e k , L L C
P a g e | 1 2
Streaming Control
Item
Description
Video Streaming
Select On/Off to enable or disable Video Streaming.
Audio Streaming
Select On/Off to enable or disable Audio Streaming.
Streaming Mode
Select P2P mode when streaming to a client via WiFi or to a single Beam RX
on a LAN. Select Multicast when streaming to multiple devices over a
multicast-enabled wired network.
Streaming Interface
Current streaming interface: WiFi or Ethernet LAN, this can be configured
from Beam’s front panel.
Encapsulation
Select RTP when streaming to a Beam RX or when the RTSP server is enabled.
Select UDP TS when using MPEG-TS to a compatible decoder.
RTSP Server
Enabling this allows multiple clients to pull the stream from an encoder using
the RTSP stream mode. Beam RX can still decode video while other RTSP
clients are connected.