Teradek Beam - Manual (Page 22)

© 2 0 1 4 . T e r a d e k , L L C P a g e | 2 0
Serial Port Configuration
Item Description
Baud Rate Sets the serial port baud rate. This should match the transmitter’s baud rate and the
equipment you wish to connect.
Stop Bit Sets the stop bit – 1 or 2.
Character Size Character size can be set from 5 bits (CS5) to 8 bits (CS8).
Parity Set to Odd, Even, or Disable.
Flow Control Flow Control is disabled.