Cabletron Systems 9F106-01 - Manual (Page 7)

Introduction
1-2
Management Information Base (MIB) Support
The 9F106-01 module provides MIB support including the following:
• IETF FDDI MIB
• IETF MIB II
LANVIEW LEDs
The 9F106-01 uses LANVIEW: the Cabletron Systems built-in visual diagnostic
and status monitoring system. With LANVIEW LEDs, you can quickly identify
the device, port, and physical layer status at a glance.
Hot Swapping
The 9F106-01 can be installed or removed from the chassis while the MMAC-Plus
is powered up without affecting the operation of the remaining modules in the
chassis.
For a complete list of supported MIBs, refer to the release notes provided in the
module package. NOTE