Tweco 12mm Cutmaster - Manual (Page 11)

CUTMASTER 10MM, 12MM
Manual 0-5197AD 1-5 GENERAL INFORMATION
1.04 Declaration of Conformity
Manufacturer: Victor Technologies
Address: 82 Benning Street
West Lebanon, New Hampshire 03784
USA
The equipment described in this manual conforms to all applicable aspects and regulations of the ‘Low Voltage Directive’ (European Council Directive
2006/95/EC) and to the National legislation for the enforcement of this Directive.
The equipment described in this manual conforms to all applicable aspects and regulations of the "EMC Directive" (European Council Directive
2004/108/EC) and to the National legislation for the enforcement of this Directive.
Serial numbers are unique with each individual piece of equipment and details description, parts used to manufacture a unit and date of manufacture.
National Standard and Technical Specifications
The product is designed and manufactured to a number of standards and technical requirements. Among them are:
• CSA (Canadian Standards Association) standard C22.2 number 60 for Arc welding equipment.
• UL (Underwriters Laboratory) rating 94VO flammability testing for all printed-circuit boards used.
• CENELEC EN50199 EMC Product Standard for Arc Welding Equipment.
• ISO/IEC 60974-1 (BS 638-PT10) (EN 60 974-1) (EN50192) (EN50078) applicable to plasma cutting equipment and associated accessories.
• IEC 60974-10 applicable to Industrial Equipment - generic emissions and regulations
• AS 1674 Safety in welding and allied processes.
• 2002/95/EC RoHS directive.
• AS60974.1 Arc Welding Equipment Welding Power Sources.
For environments with increased hazard of electrical shock, Power Supplies bearing the mark conform to EN50192 when used in
conjunction with hand torches with exposed cutting tips, if equipped with properly installed standoff guides.
• Extensive product design verification is conducted at the manufacturing facility as part of the routine design and manufacturing
process. This is to ensure the product is safe, when used according to instructions in this manual and related industry standards, and
performs as specified. Rigorous testing is incorporated into the manufacturing process to ensure the manufactured product meets or
exceeds all design specifications.
Victor Technologies has been manufacturing products for more than 30 years, and will continue to achieve excellence in our area of manufacture.