Unitec POS4000/V2-Wash Select II User Manual
Unitec
Advertising
Table of contents
Document Outline
- Quick Start Guide
- Quick Reference Guide
- 1 Overview
- 2 Installation
- 3 Testing
- 4 Management Control (Command Reference)
- 4.1 System Configuration
- 4.1.1 Set System Time and Date
- 4.1.2 Configuring a Group
- 4.1.3 Set Code Age Warning
- 4.1.4 Set Code Length
- 4.1.5 Disable Cashier Keys
- 4.1.6 Set Serial Baud Rate
- 4.1.7 Set Languages
- 4.1.8 Set Program Relays
- 4.1.9 Cash Upgrades (Options) Menu
- 4.1.10 External POS MENU->
- 4.1.11 Multiple Unit MENU->
- 4.1.12 Modem rings
- 4.1.13 E-System setup MENU->
- 4.1.14 Relay Latching
- 4.1.15 Relay Stacking
- 4.2 Multi-Use Codes
- 4.3 Fleet Account Management
- 4.4 Accounting Report
- 4.5 Set Prices
- 4.6 Service Routines
- 4.7 Clear Audit Counts
- 4.8 Set Messages
- 4.9 Set Passwords
- 4.10 Void a Code
- 4.11 Memory Information
- 4.12 Code Sales Lockout
- 4.13 Check Code Status
- 4.14 Setup a Feature
- 4.1 System Configuration
- 5 Cashier Operations
- 6 Customer Access
- 7 Printer Instructions
- 8 Backup Operations
- 9 Troubleshooting
- 9.1 Printer Doesn't Print
- 9.2 System Locked Up
- 9.3 Customer Buzzer Failure
- 9.4 Code Stacking Does Not Work
- 9.5 "Enter Wash" Signal Does Not Work
- 9.6 "Reenter Code" Signal Does Not Work
- 9.7 Bill, Coin or Audit Inputs Do Not Work
- 9.8 Main Console Keys Do Not Work
- 9.9 System Resets Each Time Power Is Turned On
- 9.10 Main Console Is "DEAD"