Unitec POS4000/V2-Wash Select II - Manual (Page 28)

P O S 4 0 0 0
Document Number: POS4007 2
1.1 Keypad Layout
Figure 1. POS4000 Keypad
During various commands, you will be prompted to enter alphanumeric responses. To do this,
you must use the alternate characters printed on the right hand side of the keys. These alternate
key values automatically become active when the console requires alphanumeric data entry.
Note that each alternate key has two characters printed on the top and bottom right hand side of
the key. When the console requests alphanumeric data, the bottom characters will initially be
active. You can switch back and forth between the top and bottom values by using the [SHIFT]
key.
Several special keys simplify alphanumeric data entry:
• [SHIFT] is used to toggle between the top and bottom selection on the alternated
keypad during alphanumeric data entry.
• [BACKSPACE] is used to erase the previous character.
• [CLEAR] has several uses depending upon what information the POS4000 is expecting.
During alphanumeric text entry (i.e. header message), it is used to erase the entire line
of data entered and to start the line over. During feature selection, it clears all current
features. During numeric entry (e.g. passwords), it clears the number and allows you to
re-enter it.
Document Title: POS4000/V2 WSII Operations Manual