Unitec WashPay Gen 1 to Gen 2 Upgrade - Manual (Page 2)

W A S H P A Y
WASHPAY GEN 1 TO GEN 2
UPGRADE MANUAL
This manual provides comprehensive procedures for upgrading the WashPay system to
the Sierra Site Controller.
If further assistance is needed, please contact the distributor from which the WashPay
system was purchased.
When calling for assistance, you must have the following information available:
Site Controller Serial Number: _______________
Distributor Name:
D E C L A R A T I O N O F C O M P L I A N C E
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense
.
C O P Y R I G H T
© 2012 Unitec, Incorporated. All rights reserved. No part of this book, including text,
screen examples, diagrams, or icons, may be reproduced or transmitted in any form, by
any means (electronic, photocopying, recording, or otherwise) without prior written
permission of Unitec, Incorporated.
T R A D E M A R K S
WashPay, Unitec, and the Unitec Logo are trademarks, service marks, or registered
trademarks of Unitec, Incorporated.
All other products, services, and company names are trademarks or registered
trademarks of their respective owners.