Valco Baby Twin Tri-mode Toddler Seat - Manual (Page 3)

FIGURE D
7. Locate the swivelling mini rod, located on
each side of the toddler seat.
FIGURE E
8. simultaneously rotate both mini rods,
and the ‘U’ shaped metal bar, so that they
meet.
9. Insert the ‘U’ legs into the nylon housings
of the mini rods until you feel them click
into place.
NOTE : UNTIL yOU HEAR A CLICk, THE BAR
Is NOT sECURE.
FIGURE F
10. you Toddler seat is now fully
assembled.
11.Insert the seat connectors into the
housings on either side of your stroller (the
place where the bumper bar goes).
12. Once secured, slightly lift up the toddler
seat to ENsURE each leg has fully engaged
in each housing.
E
F
CLICK
D
2