Valco Baby Twin Latitude Maxi Cosi Car Seat Adaptor - Manual (Page 3)

E
FIgURE E
10. slip the strap through the ‘opening’ of the
metal loop at the end of the strap.
11. Once strap is through the metal loop, pull
plastic end up to tighten, and secure on stroller.
12. Repeat the process outlined in Figures C to E
to attach the remaining strap to the middle bar of
the stroller.
FIgURE F
13. Place car seat in seat portion of the stroller.
14. Be sure your car seat is securely fitted over
the front bumper bar, and in the stroller seat.
TIP: yOU MAy wANT TO ADJUsT THE FRONT
BUMPER BAR AND sEAT RECLINE FOR A MOsT
sECURE FIT.
FIgURE g
15. Once car seat is secured, turn stroller so you
are facing the car seat front.
16. Locate the Maxi Cosi strap (as pictured in
FIgURE A.)
FIgURE H
17. Locate the inner front bar of the car seat
18. wrap the strap around the bar in an UNDER,
OVER, UNDER motion until tightly wrapped around
the bar.
FIgURE L
g
H
IMPORTANT WARNING: ALWAYS TEST THAT ALL
STRAPS ARE SECURELY ENGAGED BEFORE USE.
2
3
1
Pull up to tighten
Secure on stroller
Loop through
F
Side View Front View
1
2
3
4
Secure strap around car seat bar