Contec CheckMate V RT-U50-25S - Manual (Page 7)

under or between heavy objects, for example sofa
cushions.
2. If you have a TV that’s operated by remote control, it is
recommended that you plug it directly into a wall outlet
instead of the cable set-top terminal.
3. If you have any questions concerning the brand, model or
operation of your cable set-top terminal, contact your cable
operator.
4. If the [DEVICE] button is not operating, the remote is in its
locked mode. To set the remote to its unlocked mode, see
Section 10.
Frequently Used Terms
Audio Devices - Audio receivers, amplifiers, CD players that
you can program your remote to operate.
Default Setting – How your remote is set when you receive it
from your cable operator.
Electronic Components / Devices - The various electronic
devices the remote is designed to operate. These include
cable set-top terminals, TVs, VCRs, DVDs, receivers,
amplifiers and CD players.
Fast-Rotation - The power / mode buttons will illuminate in a
fast sequence (i.e. CABLE Æ TV Æ VCR --> DVD Æ AUDIO
Æ
CABLE…) repeated every 1/3 second. Fast-rotation occurs
when the remote is receiving keypresses to program it to your
electronic devices.
Mode - The device the remote is set to operate (ex. Cable, TV,
VCR, DVD, AUDIO). See Section 10 for locking and
unlocking the mode of the remote control.
Program (Setup) – The process of teaching your remote
control to operate your electronic devices.
Slow-Rotation - The power / mode buttons illuminate in a slow
sequence (i.e. CABLE Æ TV Æ VCR --> DVD --> AUDIO Æ
CABLE…) repeated every 1 second. Slow-rotation illumination
occurs when the remote is in the programming mode, waiting
for the next entry on the keypad of the remote.
TV Output Channel - The channel your TV needs to be set on
for proper Cable reception (most often TV channel 3, but may
be TV channel 2 or 4). If you have any questions concerning
your TV output channel, contact your cable operator. Or, with
your cable set-top terminal turned on, try setting your TV to
channel 2, 3 or 4 to obtain a clear picture.
Transport Functions - These are the [Stop], [Play], [Fwd],
[Rew], [Pause] and [REC] buttons. In the remote control's
Cable mode, these buttons operate your Cable set-top
features. However, by using the VCR / VOD / DVD toggle
button, they can be set to operate the same functions on your
VCR or DVD player.
Video Devices - VCR or DVD players.
Rev. 09/2003
© 2003, CONTEC CORPORATION
CheckMate® and Point and Press® are registered trademarks
of Contec Corporation
Explorer® is a registered trademark of Scientific-Atlanta, Inc.
Voyager™ is a trademark of Pioneer New Media
Technologies, Inc.
U.S. Patent # 6,507,306
15
DEVICE
In "unlocked" mode setting illuminates
device being operated. Press [DEVICE],
then CABLE, TV, VCR, DVD, AUDIO to
change device being operated