Tips for making perfect waffle cones, Cleaning and maintenance – Waring WWD200 User Manual

Page 5

Advertising
background image

8

9

We recommend setting #4 for Belgian waffle recipes. If you prefer

crisper, darker Belgian waffles, increase the browning control.
For evenly filled waffles, pour the batter into the center of the

lower grid and spread out evenly to the edges. The entire lower

grid should be filled.
For best results, we recommend using ¾ cup batter or enough to

fill the entire lower grid.
For added convenience while baking waffles, rest measuring

scoop with handle hanging on outside of bowl and scoop on

inside of bowl until the next baking cycle.
To measure flour, stir the flour first to aerate it, since it settles

when it sits. Then spoon it into a measuring cup, leveling off the

top with the back of a knife – do not pack down into measuring

cup. These quick steps will help you avoid “heavy waffles.”

Belgian waffles taste best when made to order, but baked

Belgian waffles may be kept warm in a 200˚F oven. Place in a

baking pan or wrap in foil while in the oven. Waffles wrapped in

foil may lose their crispness.
Baked waffles may be frozen. Allow to cool completely, and then

place in plastic food storage bag. Use waxed paper to keep

waffles separated. Reheat in an oven, toaster or toaster oven

when ready to use.

TIPS FOR MAKING PERFECT WAFFLE CONES

We recommend setting #4 when using commercial waffle cone

mixes and batter recipes. If you prefer crisper, darker waffle

cones, increase the browning control number.
For evenly filled waffle cones, place the batter in the center of

the lower grid and close the grid immediately. Most batters will

spread out evenly with the pressure of the upper grid. If you have

a very thick batter, you may need to spread the batter out a little

more, very quickly, with a heat-proof spatula.
While rolling the waffle cone, concentrate on keeping the edge of

the waffle nearest to the tip of the rolling tool. This will become

the tip of the cone and it is best to have a sealed tip when using

ice cream.
Allow waffle cones to cool completely for desired results, before

placing ice cream or any other fillng in the cone.

LIMITED ONE YEAR WARRANTY

Waring warrants every new Waring

®

Commercial Waffle/Waffle Cone

Maker to be free from defects in material and workmanship for a

period of one year from the date of purchase when used with

foodstuffs, nonabrasive liquids (other than detergents) and nonabrasive

semi-liquids, providing it has not been subject to loads in excess of

the indicated rating.
Under this warranty, Waring will repair or replace any part which, upon

our examination, is defective in materials or workmanship, provided

the product is delivered prepaid to the Waring Service Center at:

314 Ella T. Grasso Ave. Torrington, CT 06790, or any Factory Approved

Service Center.
This warranty does not: a) apply to any product that has become worn,

defective, damaged or broken due to use or due to repairs or servicing

by other than the Waring Service Center or a Factory Approved Service

Center, or due to abuse, misuse, overloading or tampering; or b) cover

incidental or consequential damages of

any kind.
Warning: This warranty is void if appliance is used on Direct

Current (DC).

WARING COMMERCIAL

314 Ella T. Grasso Ave.

Torrington, CT 06790

CLEANING AND MAINTENANCE

Once you have finished baking, turn control knob to setting #1,

switch toggle to OFF position and remove plug from electrical

outlet. Leave top lid open and allow grids to cool before cleaning.
Never take your waffle/waffle cone maker apart for cleaning.

Simply brush crumbs from grooves and absorb any excess

cooking oil by wiping with a dry cloth or paper towel. You may

clean the grids by wiping with a damp cloth to prevent staining

and sticking from batter or oil buildup.
Be certain grids have cooled completely before cleaning. If

batter adheres to plates, simply pour a little cooking oil onto the

baked batter and let stand approximately 5 minutes, thus allowing

batter to soften for easy removal.
To clean exterior, wipe with a soft dry cloth. Never use an

abrasive cleanser or harsh pad. NEVER IMMERSE CORD,

PLUG OR UNIT IN WATER OR OTHER LIQUIDS.
Any other servicing should be performed by an authorized

service center.

Advertising
This manual is related to the following products: