Wildview STC-TGL-X35IR - Manual (Page 7)

STC-TGLX35IR
www.wildviewcam.com Toll Free 888-304-6125
7
Battery & memory installation
The Wildview Camera is designed to operate using two different types
of battery power options.
NOTE: Always have camera in the OFF position when installing or
removing batteries. Removing battery while the camera is in operation
may damage the camera.
Batteries “C” cell
The internal battery compartment accepts 4 “C” cell batteries. Be sure
to use high quality brand name alkaline batteries. Install batteries with
correct polarity (+/-) as noted inside the battery compartment.
Warning: Do not use a different Voltage lead
acid battery other than the one specified in
this section. Doing so will damage the camera
and will void the warranty.