Wildview STC-TGL-X8IR - Manual (Page 6)

www.wildviewcam.com
Toll Free 888‐304‐6125
21
Deleting files in the field:
Your camera provides you with a few options for deleting files stored on the
internal or external memory while in the field.
(Option #1)
1. Slide the CAM toggle switch to ON position. The LCD screen will display
the number of images stored in the memory.
2. Press [SET] button to enter Delete mode. Display will show “ESC”.
3. Press [UP] or [DN] button to select the desired function.
¾ ESC (No Delete) ‐ No images get deleted.
¾ d‐ONE (Delete One) ‐ Only the last file will get deleted.
¾ d‐ALL (Delete ALL) ‐ Deletes ALL images on the SD card.
¾ Ft (Format) ‐ Deletes all files and reformats the SD card.
4. Press the [SET] button to confirm selection.
5. Press [UP] or [DN] until screen shows “ESC” then press [SET] again to exit.
www.wildviewcam.com
Toll Free 888‐304‐6125
22
(Option #2)
Simply remove the batteries from the battery compartment. If you are using
an SD memory card as your storage device, you must delete images by
following the step described above.
Low Battery Indicator:
Your camera is equipped with a low battery indicator. The Red Low Bat LED
indicator will blink when battery is running low.
1. Turn off the camera.
2. Download all the pictures immediately.
NOTE: DO NOT attempt to replace the batteries before you have saved the
images in your PC. Once the batteries are drained completely, or if you
attempt to replace the batteries, all images in the internal SDRAM memory
will be lost.
3. Replace batteries. Be sure to use brand name alkaline batteries.
WARNING: Do not remove the batteries until you have downloaded all the
images off the internal SDRAM. Once the batteries are removed, all files in
the internal SDRAM will be deleted. (This does not apply to files stored on
SD memory card).
www.wildviewcam.com
Toll Free 888‐304‐6125
23
MEMORY COMPATIBILITY CHART
The following cards have been tested and approved for use with the STC‐
TGLX8IR model.
Kingmax 2G
SanDisk 2G, 4G, 8G
Toshiba 2G
PNY 2G, 4G, 8G, 16G.
Kingston 2G, 4G, 8G, 16G.
First Champion 1G, 2G, 4G, 8G, 16G.
Lexar 4G, 8G, 16G
DANE‐ELEC 4G, 8G, 16G
NOTE: Proper camera operation cannot be guaranteed when using memory
cards NOT listed above.
www.wildviewcam.com
Toll Free 888‐304‐6125
24
TECHNICAL SPECIFICATIONS
System Requirements and Compatibility
• Windows Me/2000/XP/Vista/ Windows 7
• Pentium 4, 2GHz or above
• 1GB RAM (2GB recommended)
• 32 bits color, resolution 800 x 600 or above. Built in 128MB video
memory
• 2GB free hard disc space
• An available USB 1.1 port (USB 2.0 recommended)
• Direct X 9.0 or above – Should come with your operating system already
• Optional: Windows compatible sound card and speaker
NOTE: If you have any questions regarding your PC specifications, please
call your PC manufacturer.