Winchester Repeating Arms 1885 Creedmoor - Manual (Page 2)

S IGHT I NSTALLATION
WARNING: CAREFULLY READ ALL INSTRUCTIONS IN
THIS OWNER’S MANUAL BEFORE INSTALLING OR
USING YOUR VERNIER SIGHT. ALWAYS KEEP THE
MUZZLE OF YOUR FIREARM POINTED IN A SAFE
DIRECTION. OPEN THE ACTION. MAKE CERTAIN
YOUR FIREARM IS UNLOADED BEFORE ATTACHING
YOUR SIGHT.
The Creedmoor vernier tang sight set (Figure 1) may
have been installed at the factory. If you purchased
this sight as an accessory, perform the following
installation instructions or contact a qualified
gunsmith for installation.
Descriptions in these instructions generally refer to
the firearm in the horizontal, normal firing position.
For example, the muzzle is forward or front; the
buttstock is rearward or rear; the trigger is downward
or underneath; the sights are upward or on top.
1 1
FIGURE 1
1: Front Sight Insert 2: Front Sight Insert Sheet 3: Front Sight Insert Plastic
Container 4: Front Sight Retaining Ring 5: Front Sight Body 6: Rear Sight
Disks 7: Rear Sight Elevator 8: Rear Sight Ladder 9: Rear Sight Windage
Knob 10: Rear Sight Elevation Knob
1
4
6
10
8
7
9
5
2
3