Winchester Repeating Arms 1885 Creedmoor - Manual (Page 5)

4 4
I NSERT I NSTALLATION —
1. Remove the sight retaining ring from the
front sight body by turning the knurled end
counterclockwise (Figure 5).
2. Select which sight insert you wish to use and
place it in the sight body. The sides of each insert
are designed to fit snugly into the notches in the
sides of the front sight body (Figure 6).
FIGURE 4
Spring steel sheet with eight separate front sight inserts
FIGURE 6 FIGURE 5
1: Front Sight Retaining Ring 2: Bubble Level 3: Right Adjustment Screw
4: Left Locking Screw 5: Sight Insert 6: Front Sight Body
5
6
4
2
1
3