Winchester Repeating Arms 1300 (Historic Manual) - Manual (Page 22)

8. Tighten the screws snugly, but do not overtighten.
9. Mount your scope rings and scope as outlined in the
instructions supplied with your scope rings and/or
scope. Always make sure you have the proper eye relief.
Always make sure that the saddle crossbolts and the
cap bolts are fully tightened before using your shotgun.
C OMPLETE D ISASSEMBLY
One of the advantages of a Model 1300 is the ability to
disassemble the action for cleaning. Under very harsh
weather conditions and in dirty environments just knowing
that parts are clean and lightly oiled can add an extra
measure of confidence to your shooting experience.
Make sure you have a clean place to work and a good
place to put the components as they are disassembled
(Figure 12).
FIGURE 12
Barrel
Magazine Spring
Magazine
Follower
Magazine
Spring Retainer
Magazine
Cap
Receiver
Barrel Bracket
Magazine Tube
Forearm
Slide Arms
Trigger Guard Pin
Trigger Guard Group
Slide Arm Bridge
Firing Pin
Firing Pin Spring
Breech Bolt
Breech Bolt Slide Magazine Plug
WinChoke ® Tube
20