Winchester Repeating Arms 9422 (Historic Manual) - Manual (Page 9)

The Winchester Model 9422 is also shown disassembled
to the extent necessary in order to follow instructions
contained in this book (see Figure 9 later in this manual).
Throughout this manual the “action” refers to the
mechanism of this rifle which loads and secures the
cartridges in the chamber.
S ERIAL N UMBER
The serial number is located in two places on your Model
9422: one on each half when disassembled (see Figure 3).
One is on the bottom of the forward receiver/frame
assembly (barrel half of the rifle) toward the front. The
other is just rearward of the first one, on the rear
receiver/frame assembly (buttstock half of the rifle).
Record the serial number at the front of this book for
future reference.
7
Serial Number.
Record it for future reference.
Extractor Right
Upper
Extractor Left
Ejector
Extractor
Right
Lower
Bolt Face
Carrier Pawl
Firing Pin
This Figure is to acquaint you with the Model 9422’s
breech bolt terminology. Do not attempt to disassem-
ble the breech bolt.
Breech Bolt Locking
Surface
Bolt Cam
Pin
Bolt Slide
Firing Pin Striker
The hammer strikes the rear of
the firing pin striker, which in
turn strikes the firing pin.
FIGURE 2B
FIGURE 2C
FIGURE 3