Winchester Repeating Arms Supreme (Historic Manual) - Manual (Page 27)

adjustment changes fit you. Increase or decrease the
length of pull following the instructions above if neces-
sary. Do not adjust more than allowed by the “dot” index
marks on the plate and trigger shoe. When you have
found the adjustment you prefer, tighten the set screw.
Always make sure the trigger shoe is totally secure before
firing. Checking the tightness of the set screw should be
part of your regular maintenance.
C LEANING AND M AINTENANCE S UGGESTIONS
Your Supreme will function better and more reliably over
a longer period of time if it is properly maintained and
kept clean.
BEFORE PERFORMING ANY CLEANING
PROCEDURES, ALWAYS MAKE CERTAIN THERE ARE
NO SHELLS IN THE CHAMBERS.
You should clean your Supreme after every day of
shooting and more often if it becomes excessively dirty.
A minimum cleaning includes wiping down the action
and oiling key parts. Most regular maintenance will also
include cleaning the barrels. If you encounter a function
problem (tightness when breaking open or closing the
action) be sure to give your gun a thorough cleaning to
see if it solves the problem before seeking the services of
our service facility or a competent gunsmith. To clean
your firearm, adhere to the following general guidelines.
25
FIGURE 19
Insert the allen wrench in the set
screw and loosen the screw.
FIGURE 20
Move the trigger
shoe to the desired
setting. Fully tighten
the set screw before
shooting.
Supreme Manual 01/01 7/17/03 11:00 AM Page 25