CCI Thermal Technologies SF-1 - Stratafa Forced Convection Fan for Infrared Heaters - Manual (Page 5)

5
5.5 bottom Installation:
(i) place on top of the unit with the heat
collection plate directly in front of the
pad surface.
CAuTIOn
dO nOT PuT sTRATAfAn™ OvER TOP
Of ThE suPPORTInG RAIL.
use a 5/32” allen key
(ii) support the unit while tightening the hex
head, socket cap screws using a 5/32”
allen key. This will clamp the unit to the
heater box.
use a 7/64” allen key
(iii) secure the stratafan™ to the
cata-dyne™ unit heater by tightening
the cone head set screws using a 7/64”
allen key.
6.0 REPAIRs
6.1 Under no circumstances should users attempt
to repair the stratafan™. User repair will void
the product warranty and the csa intrinsic
Safety Certification.
6.2 contact the original sales distributor to
arrange for product repair.
7.0 RETuRn GOOds POLICy
7.1 all product returns must be sent to the original
sales distributor. prior written approval
must be obtained for the return of any
Cata-Dyne™ product(s). Final acceptance
will be contingent on inspection at the factory.
8.0 ORdERInG InfORmATIOn
8.1 order any of cci Thermal products
by telephone, fax, email or online at
www.ccithermal.com.
separate Installation and Operation Instructions are available for industrial heating applications.