OSRAM SYLVANIA LED ULTRA 6” Gimbal Recessed Kit - Manual (Page 3)

Step 5: Plug Edison base cable connector
into the LED recessed kit.
Step 6: Carefully route wires into fixture.
Step 4: Measure housing internal diameter
and adjust spring clip position in order to
achieve a tight fit inside the housing.
Step 7: Push recessed kit up flush to
ceiling surface.
Note : Before recessed kit insertion, make
sure to properly orient kit toward the surface
to be illuminated.
7a 7b
Step 3: Screw Edison base adapter into
socket in recessed housing.
4
5 6
3