LaMotte Tracer SAL Meter - Manual (Page 3)

Replacing the Electrode . . . . . . . . . . . . . . . . . . . . . 16
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
INTRODUCTION
Congratulations on your purchase of the EC/TDS/SAL (Electro
Conductivity/Total Dissolved Solids/Salinity) TRACER PockeTester.
The TRACER is a revolutionary, first of its kind measurement device
that offers direct reading of conductivity, TDS and salinity with one
electrode. Careful use and maintenance will provide years of reliable
service.
SPECIFICATIONS
Display 2000 count LCD with Bar Graph
Conductivity Range 0 to 199.9 µS
200 to 1999 µS
2.00 to 19.99 mS
TDS Range 0 to 9,990 ppm
(variable ratio)
Salinity Range 0 to 9,990 ppm Salt
(fixed ratio of 0.5)
TDS Ratio 0.4 to 1.0, adjustable
Salinity Ratio 0.5 fixed
Conductivity ATC 2.0% per °C
Temperature Range 32.0 to 149.0 °F, 0.0 to 65.0 °C
Temperature Resolution 0.1 up to 99.9, 1>100
Temperature Accuracy
±1.8°F, 1°C (from 32 to 122°F, 0 to 50°C)
± 5.4°F, 3°C (from 122 to 194°F, 50 to 90°C)
Conductivity ATC
Range
32.0°F to 140°F, (0.0°C to 60.0°C)
Accuracy Conductivity: ± 2% FS
TDS: ± 2% FS
Salinity: ± 2% FS
Measurement Storage 25 numbered readings
Low Battery Indication ‘
BAT’ appears on the display
Power Four CR 2032 Lithium Ion batteries
Auto Power Off After 10 minutes of no button presses
3