Vermont Casting 2479 - Manual (Page 14)

14
Dutchwest Non-Catalytic Convection Heater
30002291
Distance from Center of Flue Collar to Wall in Top-Exit Installations
Dutchwest Convection Heater Model 2479
NOTE: These are not clearance distances. These measurements indicate where the centerline of the flue col-
lar will be for various installations. Measurements are from the centerline of the flue collar to the wall, not the
wall protector.
ST427
dutchwest
flue centerline
6/30/00 djt
A
B C E
D
F
C F
Chimney Connector Side Rear Corner Side Rear Corner
Listed, Approved (A) 34¹⁄₂” (B) 12¹⁄₂” (C) 21” (D) 22¹⁄₂” (E) 12” (F) 20¹₂”
Double-wall, with (846 mm) (318 mm) (533 mm) (572 mm) (305 mm) (521 mm)
flue collar shield
Single wall, with
(A) 29¹⁄₂” (B) 12¹⁄₂” (C) 21” (D) 22¹⁄₂” (E) 9¹⁄₂” (F) 18¹⁄₂”
Connector heat shields (749 mm) (318 mm) (533 mm) (572 mm) (241 mm) (570 mm)
and flue collar shield
Single wall with no
(A) 35¹⁄₂” (B) 23¹⁄₂” (C) 30” (D) 22¹⁄₂” (E) 17¹⁄₂” (F) 25”
heat shields (902 mm) (967 mm) (762 mm) (572 mm) (445 mm) (635 mm)
UNPROTECTED SURFACES PROTECTED SURFACES
Corner Corner
Parallel Installations Installations Parallel Installations Installations
ST427