Chicago Electric 6-1/2 Gallon Plastic Parts Washer 96952 - Manual (Page 5)

Page 5 SKU 96952 For technical questions, please call 1-800-444-3353.
Follow instructions provided with solvents. 4.
Use only in well-ventilated area. Locate washer at least 18 inches above floor. 5.
6. Do not expose to combustible fumes. Washer has internal arcing or
sparking parts that can cause ignition.
Immerse pump during use. Do not operate washer without enough solvent 7.
Maintain labels and nameplates on the tool. These carry important safety infor- 8.
mation. If unreadable or missing, contact Harbor Freight Tools for a replacement.
Do not leave the tool unattended when it is plugged into an electrical outlet. Turn
9.
off the tool, and unplug it from its electrical outlet before leaving.
This product is not a toy. Keep it out of reach of children.
10.
People with pacemakers should consult their physician(s) before use. Electro- 11.
magnetic fields in close proximity to heart pacemaker could cause pacemaker
interference or pacemaker failure. In addition, people with pacemakers should:
• Avoid operating alone.
• Properly maintain and inspect to avoid electrical shock.
• Any power cord must be properly grounded. Ground Fault Circuit Interrupter
(GFCI) should also be implemented – it prevents sustained electrical shock.
The warnings, precautions, and instructions discussed in this instruction manual
12.
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
saVe these instructions.
grounding
improperly connecting the grounding wire can result in
electric shock.
Check with a qualified electrician if you are in doubt as to
whether the outlet is properly grounded. do not modify
the power cord plug provided with the tool. never remove
the grounding prong from the plug. do not use the tool if
the power cord or plug is damaged. if damaged, have it
repaired by a service facility before use. if the plug will not
fit the outlet, have a proper outlet installed by a qualified
electrician.
warning