Chicago Electric 6-1/2 Gallon Plastic Parts Washer 96952 - Manual (Page 9)

Page 9 SKU 96952 For technical questions, please call 1-800-444-3353.
Once all parts have been cleaned, turn the Power Switch off and unplug the elec- 6.
trical cord.
Dispose of the solvent as required by any State, local, or Federal guidelines and
7.
regulations. See the directions on the solvent, or contact the local Hazardous
Waste Disposal Authorities.
Clean, then store the tool indoors out of children’s reach.
8.
Maintenance and serVicing
risk of serious personal injury from accidental starting
or electric shock. turn the power switch of the tool to its
“oFF” position and unplug the tool from its electrical outlet
before performing any inspection, maintenance, or cleaning
procedures.
damaged equipment can fail, causing serious personal
injury. do not use damaged equipment. if abnormal noise or
vibration occurs, have the problem corrected before further
use.
cleaning, maintenance, and lubrication
BeFore each use, 1. inspect the general condition of the tool. Check for loose
screws, misalignment or binding of moving parts, cracked or broken parts, dam-
aged electrical wiring, and any other condition that may affect its safe operation.
aFter use,
2. clean external surfaces of the tool with clean, moist cloth.
warning! if the supply cord of this power tool is damaged, it must be 3.
replaced only by a qualified service technician.
warning