ClearOne Spontania Admin Manual - Manual (Page 13)

administrator . If logged in as the area administrator the screen will display read only values that
cannot be modified.
There are two default areas created depending on the activation of certain modules:

Area IM is created by default when the IM module is configured.

Area Spontania is created by default when Spontania module is configured.
Area IM cannot be deleted by the administrator.
Create an Area
In order to create an area, simply click on the “
Create ” button located above the list of areas. A form
will appear in which the requested data must be entered.
Although it is best to provide as much data as possible at this point, only the name is mandatory.
By default a new area inherits the same active services of the Entity to which it belongs, so this
information is not requested on the form used to create each area. The “Modification” option ‐
explained in the following section ‐ must be used to change these parameters.
Once all the information has been entered, click “
Save .”
If the area has been created correctly, the “Areas” screen will reappear, showing how the new group
has been incorporated into the list of all existing groups.
ADMINISTRATORS MANUAL 13