ClearOne Spontania Admin Manual - Manual (Page 14)

Modify an Area
It is possible to gain access to the contents of an area at any time in order to carry out necessary
modifications. Simply click on the respective area name to modify the parameter
This will automatically open a screen showing current area values and allowing for the modification
of any specific feature. The illustration below shows such a modification.
It is important to remember that the same data required to create an area is mandatory and listed
here. An additional series of parameters will appear with values inherited from the company, as
mentioned above.
Thus all the services that were enabled when the entity was created will appear as activated and may
now be selected. If any services were not enabled when the entity was created, they will appear here
as “not available” or will not appear at all.
It is important to remember that each area must be created with a unique name.
ADMINISTRATORS MANUAL 14