ClearOne Converge Pro Serial - Manual (Page 16)

243
BFZONE – Manually Disables/Enables Beamforming Mic Zones
For each Mode of a Beamforming Mic manually Enable or Disable each of the Mic Zones.
Command Form : DEVICE BFZONE <Channel> <Group> [Zone 1] [Zone 2] [Zone 3] [Zone 4] [Zone 5] [Zone
6]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels -
Group Group 1 29 (V) -
Zone 1 Unsigned
Character 1 0 = Zone Disabled
1 = Zone Enabled
(Null to Query in Text)
-
Zone 2 Unsigned
Character 1 0 = Zone Disabled
1 = Zone Enabled
(Null to Query in Text)
-
Zone 3 Unsigned
Character 1 0 = Zone Disabled
1 = Zone Enabled
(Null to Query in Text)
-
Zone 4 Unsigned
Character 1 0 = Zone Disabled
1 = Zone Enabled
(Null to Query in Text)
-
Zone 5 Unsigned
Character 1 0 = Zone Disabled
1 = Zone Enabled
(Null to Query in Text)
-
Zone 6 Unsigned
Character 1 0 = Zone Disabled
1 = Zone Enabled
(Null to Query in Text)
-
BFMUTEMACRO – Define Macros that Run When Beamforming Mic Mute Button Is Pressed
Define which macros to run on which ConvergePro board to Mute and Un-Mute groups of Beamforming Mics
when the specified Beamforming Mic’s Mute button is pressed. This allows pressing a single button to Mute or
Un-Mute multiple Beamformingr Mics. If the Macro numbers are zero (default) then ALL Beam Former Mics in the
system will be Muted or Un-Muted.
Command Form : DEVICE BFMUTEMACRO [Type ID] [Device ID][ Mute On Macro] [Mute Off Macro]
Argument Type Size Values Units
Type ID Integer 1 Type ID of board where the Mute On and Mute Off
Macros are defined (Null to Query in text)
-
Device ID Integer 1 Device ID of board where the Mute On and Mute Off
Macros are defined
-
Mute On
Macro Integer 1 See 14(C) in Groups and Channels
-
Mute Off
Macro Integer 1 See 14(C) in Groups and Channels
-
BFLED – Beamforming Mic LED Mode
This command sets/reports the mode of the Mute Button LEDs on a Beamforming Mic.
Command Form : DEVICE BFLED [Value]
Argument Type Size Values Units
Value Integer 4 0 = OFF (Always not lit)
1 = Steady Red when Muted –
Steady Blue when Un-Muted (Default)
2 = Blinking Red when Muted –
Steady Blue when Un-Muted
(Null to Query in text)
-