ClearOne Connect AVB - Manual (Page 13)

QUICK-START GUIDE
11
AVB Mode
“AVB” uses the AVB protocols for streaming of audio with AVB switches.
“Legacy” simplifies the AVB packets allowing them to pass through
“legacy” LAN switches and routers
Reset
Used to force initialization of audio streaming after Talker and Listener and
TX changes are made.
Talker and Listener Stream ID’s
AVB endpoints are able to pass streams between each other. The Talker
sends the stream and the Listener receives the stream. On a network,
each stream has a unique 64 bit (hex) ID. A Talker must be assigned a
unique ID. For the Listener to receive the stream is must be assigned the
same ID as the desired Talker. The CONVERGE AVB is both a Talker and
a Listener
Number of Audio Channels per AVB Talker
When the Converge AVB is a Talker it can set to use 2, 4, 6, or 8 audio
channels. On the E-bus connected CONVERGE Pro, the audio channels
start with the S Bus input.
Number of Audio Channels per AVB Listener
When the Converge AVB is a Listener it can receive 2, 4, 6, or 8 audio
channels. On the E-bus connected CONVERGE Pro the audio channels
start with the S Bus output.