ClearOne XAP TH2 - Manual (Page 35)

31 Appendices ~ Appendix C: Serial Commands
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
XAP TH2 Serial commands
Command Function
AA Sets auto-answer for a telco channel
ACONN Sets the audible connect signal to on/off
ACONNLVL Sets the level of the audible connect signal
AD Sets auto-disconnect for a telco channel
ALC Sets the ALC for the telco receive
BAUD Selects/reports the baud rate of the serial port
COUNTRY Sets/reports the country for compliance
DIAL Dials a DTMF sequence or reports last
sequence dialed
DID Selects/reports device ID
DTMFLVL Sets the DTMF tone level in the room
DTONELVL Selects/reports the audible dial tone level
FLOW Selects/reports the flow control of the serial
port
HOOK Sends a hook flash to the telephone line
HOOKD Sets hook flash duration
LABEL Selects/reports label of specified channel
LVL Reports in, out, or processor level
LVLREPORT Selects/reports level status
LVLRRATE Sets the level report rate for the unit
MDMODE Enables/disables the modem mode for the unit
MINIT Sets/reports modem initialization string of
serial port
MUTE Sets/reports mute status
NULL Renulls the XAP TH2 to the telephone line
Command Function
PRGSTRING Sets/reports a programmed string
REDIAL Redials the last number
RING Indicates a ringing line (reportable only)
RINGER Sets the audible ringer for a telco channel
RINGERLVL Sets the audible ring indication level
RXBOOST Sets the receive boost at 0, 3, 6, 9, or 12dB
RXBSTEN Enables/disables receive boost
RXRD Sets the RX reduction for the telco channel
SERECHO Selects/reports the serial echo of the RS-232
SERMODE Selects/reports the serial mode of the RS-232
SPEEDDIAL Dials one of ten numbers on the telco channel
STOREDIAL Saves a number in speed dial or reports the
current value
STRING Executes a string for the RS-232 port
TAMODE Sets the telco adapt mode for the telco
channel
TE Sets the telco enable for the telco channel
TERL Reports the telco echo return loss (read only)
TERLE Reports the telco echo return loss
enhancement (read only)
TOUT Selects/reports the title screen inactivity time
out
UID Reports unit ID (read only)
VER Reports unit version (read only)