ClearOne XAP TH2 - Manual (Page 44)

Appendices ~ Appendix C: Serial Commands 40
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
REDIAL – Dial the last number again
This command redials the last number. There is no query for this command.
Command form: DEVICE REDIAL <Channel>
Argument details
Name Description
Channel See Groups and Channels, page 29
Group 17 (R)
Example: #60 REDIAL 1 On XAP TH2 unit 0 (#60), the hybrid (1) will redial
the last number dialed.
RING - Ring Indication
This command indicates a ringing line. This command is reportable only. It cannot
be queried or set.
Command form: DEVICE RING <Channel>
Argument details
Name Description
Channel See Groups and Channels, page 29
Group 17 (R)
Example: If the TH2 detects an incoming ring signal, the command returns
DEVICE RING 1.
RINGER - Audible Ring Selection
This command sends/reports the use of an audible ring.
Command form: DEVICE RINGER <Channel> [Value]
Argument details
Name Description
Channel See Groups and Channels, page 29
Group 17 (R)
Value 0 = Off, 1 = On, 2 = Toggle, (Null to query in text)
Example: If the audible ring indication is enabled, the command returns DEVICE
RINGER 1 1.