ClearOne MAX Wireless/MAXAttach Wireless - Manual (Page 14)

10 Technical Services: 800-283-5936
CHAPTER 3: USER OPTIONS
CALLING FEATURES
In addition to the basic phone operations described in the previous chapter, you can use calling features to perform
any of the following functions during a call:
Change to Pulse Dialing
Send a Flash Signal
Display a Phone Number
Adjust Speaker Volume
Turn the Ringer On/Off.
These functions are described in the following sections.
To Use Pulse Dialing
MAX Wireless uses tone dialing by default. You can temporarily change to pulse dialing during a call.
• Press the star (*) key. A special character will appear. All numbers entered after this character will use pulse
dialing. When the call is finished, the dialing mode automatically reverts to tone dialing.
NOTE: When more than 18 characters are entered, a scroll button will appear on the LCD display,
and the numbers will scroll from right to left.
To Send a Flash Signal
If your telephone service includes call transfer, call waiting, conference calling, or other carrier features, use the flash
key to activate the feature. Refer to your local telephone service provider for details.
To Display Your Local Number During a Call
• Press CLEAR. The phone number will appear. After several seconds, the call timer will return.
To Adjust Speaker Volume
• Press the VOLUME UP key while on a call to increase volume.
• Press the VOLUME DOWN key while on a call to decrease volume.
To Turn the Ringer On/Off
• Press and hold the star (*) key. The ringer off icon illuminates when ringer is turned off (as shown above).
To Mute During Ringing
• Press the star (*) or the MUTE key to mute the ringer until the incoming call terminates.
•
•
•
•
•
Chapter 3: User Options 10