ClearOne MAX Wireless/MAXAttach Wireless User Manual
Page 16
12 Technical Services: 800-283-5936
Press REDIAL/PROG.
Enter the local phone number.
Press REDIAL/PROG to save the number.
Press CLEAR to exit programming mode.
NOTE
: Press and hold the
1
numeric key to enter a hyphen. Press the “
*”
key to enter a space in
the number. Use
CLEAR
to delete the old number before entering a new number.
To Program a Speed Dial Number
Press and hold REDIAL/PROG until the program icon appears on the LCD screen.
Press the 5 numeric key to enter the speed dial menu.
Press REDIAL/PROG.
Enter the phone number.
Press REDIAL/PROG to save the number.
Press CLEAR to exit programming mode.
NOTE
: Press & hold the
1
numeric key to enter a hyphen or the
*
key to enter a space in the
number. Use
CLEAR
to delete the old number before entering a new number.
To Program the Service Center Number
Press and hold the REDIAL/PROG key until the program icon appears on the LCD screen.
Press the 6 numeric key to enter the service center menu.
Press REDIAL/PROG.
Enter the number you want MAX Wireless to dial when the 0 numeric key is pressed.
Press REDIAL/PROG to save the number.
Press CLEAR to exit programming mode.
NOTE
: Press & hold the
1
numeric key to enter a hyphen or the
*
key to enter a space in the
number. Use
CLEAR
to delete the old number before entering a new number.
To Restore Factory Defaults
Press and hold the REDIAL/PROG key until the program icon appears on the LCD screen.
Press and hold the 9 numeric key. The number 8 appears across the LCD screen.
Press REDIAL/PROG to confirm the selection.
Press CLEAR to exit programming mode.
To Program Automatic Gain Control (AGC) and Automatic Level Control (ALC)
Press and hold the REDIAL/PROG key until the program icon appears on the LCD screen.
Press and hold the 8 numeric key. The current AGC setting number appears on the LCD screen.
Press REDIAL/PROG. The current setting number flashes.
Enter a new setting number using the AGC/ALC table shown above.
Press REDIAL/PROG to confirm selection.
Press CLEAR to exit programming mode.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.