Carver CV Series - Manual (Page 6)

Rev 04.08.021 - 6 –
CV1502 CV2502
Power Output Power Output
• 150W per channel into 4 ohm and 8 ohm loads,
• 250W per channel into 4 ohm and 8 ohm loads,
autoformer coupled, 40Hz to 20kHz ±3dB autoformer coupled, 40Hz to 20kHz ±3dB
with < 0.5% THD at full power with < 0.5% THD at full power
• 150W per channel, transformer coupled @ 25V,
• 250W per channel, transformer coupled @ 25V,
35V, 50V, 70V and 100V, 40Hz to 18kHz ± 3dB 35V, 50V, 70V and 100V, 40Hz to 18kHz ± 3dB
with < 0.5% THD at full power
• 300W parallel mono at 4 Ohms, 300W parallel
• 500W parallel mono at 4 Ohms, 500W parallel
and bridged mono at 8 and 16 Ohms, 50V, 70V, and bridged mono at 8 and 16 Ohms, 50V, 70V,
100V, 140V and 200V with no more than 0.5% THD 100V, 140V and 200V with no more than 0.5% THD
Common Features
• Convection Cooling
• 5-segment LED level display, per channel,
including signal present and clip indicators
• 3 LED display, per channel, of Power, Protect and
Thermal Overload
• Standby LED indicates the amplifier is in Standby
Mode
• Data LED (used with Computer Control module)
• Level controls can be covered with a cap
(supplied) to prevent tampering
• Remote control of output level via Euro Style
connector
• Unbalanced Effects Loop (send/receive) via Euro
Style Connector
• Standard Dual Input Module with line level inputs
via Euro Style connectors and XLR jacks,
connected in parallel
• Switched Clip Limiters
• 26Hz High Pass Filters
• Switched 80Hz and 120Hz (12db/Octave cut)
High Pass Filters
• Terminals for Sequencing Power ON/OFF
• Speaker Outputs via large gauge Euro Style
connectors
• Power Switch, 3 positions On, Off, Standby
• AC Line Cord (Detachable IEC Type)
• Optional Accessories:
− Four Input Mixer Module with zone assignment
− Paging Modules with variable ducking
− Expanded Mic/Line Level Input Module
− Computer Control & Monitoring via
i ON Media 
Control Module
− DSP control of 28 Band Graphic EQ, 5 Band
Parametric EQ, HP Filter, LP Filter, Crossover,
Adjustable Limiting and Adjustable Delay via
i ON Media  DSP Tools Module