Carver CV Series User Manual
Page 9
Rev 04.08.021
- 9 –
SPECIFICATIONS with Basic input module
PERFORMANCE:
• THD:
0.5% at rated power, 0.2% at 1/8 rated power at 1kHz
•••• IMD DIM30 Method:
<0.2%
•••• Dynamic Headroom:
1.5dB
•••• Power Bandwidth:
40 Hz to 20 kHz 4 and 8 ohm loads
•••• Frequency Response:
26 Hz to 20 kHz +0.5, -3 dB 4 and 8 ohm loads
•••• Signal-to-Noise
94dB (typical), A-Weighted, referred to rated power
•••• Crosstalk:
-60dB, full bandwidth
•••• CMRR:
75dB @ 1kHz
•••• Slew Rate:
7V/µSec
•••• Sensitivity for rated power (includes EFX Inputs):
0dB or 0.775V
rms
•••• Input Impedance (includes EFX Inputs):
50kΩ balanced
•••• Input Overload (includes EFX Inputs):
20dBu
•••• Protection:
Thermal, Short Circuit, and Over-current & Over Voltage
•••• Stability:
Unconditionally stable into reactive loads
•••• Duty Cycle:
Continuous operation at 1/3 rated power
POWER
REQUIREMENTS:
•••• Mains Voltage (output power rated at nominal voltage): 100VAC, 50-60Hz ±20%
120VAC, 60Hz ±20%
230VAC, 50Hz ±20%
• Power Consumption
(See Appendix A)
REGULATORY COMPLIANCE:
•••• Proposed ETL/C Mark to:
UL6500, 2
nd
Edition
•••• CE Certification to:
EN55103-1 & EN55103-2
PHYSICAL:
•••• Cooling Method:
Convection
•••• Operating Environment:
-10
o
C to 55
o
C, up to 85% RH
•••• Storage Environment:
-45
o
C to 70
o
C, up to 93% RH
•••• Dimensions:
5.25” H (2U) x 19.0” W x 17.25” D
133mm x 483mm x 438mm
•••• Net Weight:
CV4002 – 54.0lbs. / 24.5kg
•••• Shipping Weight:
CV4002 – 60.0lbs. / 27.3kg