Wheatheart Self-Propelled Post Pounder Kit - Manual (Page 6)

1. I NTRODUCTION W HEATHEART - S ELF -P ROPELLED P OST P OUNDER K IT
1.1. P URPOSE OF THE E QUIPMENT T RAILER P OST P OUNDER M ODEL
6 IM12 R3
1.1. PURPOSE OF THE EQUIPMENT
The Self-Propelled Post Pounder Kit is designed and manufactured for the
efficient installation of fence posts. Before operating near power lines or buried
gas lines, consult local utility companies. Ensure all support legs are secured on
the ground before operating. Use only a tractor, towing vehicle or skid steer
loader of adequate power and capacity to operate the machine. Use in any other
way is considered as contrary to the intended use.
The following are unacceptable misuses of the Self-Propelled Post Pounder Kit.
Damage caused by such misuse is not covered by warranty. When operating or
maintaining the Self-Propelled Post Pounder Kit, NEVER:
• let impact head free fall without pounding a post, if head must be lowered,
shut off and lock out power source and gently actuate hydraulic valve.
• use the hugger to straighten crooked post.
• use hands to isolate and identify leak.
• position a foot under the machine.
• transport without fully retracting the pounder mast head.
• modify the equipment.
This equipment should be operated, serviced, and repaired only by persons who
are familiar with its particular characteristics and who are acquainted with the
relevant safety procedures. Any arbitrary modifications carried out on this
equipment may relieve the manufacturer of liability for any resulting damage or
injury.