Great Plains 3P606NT Assembly Instructions - Manual (Page 20)

Great Plains Mfg., Inc.
20 Small Seeds Option
133-140M 04/02/2009
Existing Parts Affected
The following existing parts are involved in the kit instal-
lation. The Disposition column indicates whether the part
is left in place, moved or not re-used.
The part call-out numbers in the list matches all Figures
in the installation instructions. The general descriptions
match those in your drill Parts manual.
The part numbers are representative of parts found on
older drills, but may not exactly match those on your drill.
This is not a concern for undamaged parts re-installed or
not re-used at all. If you need to replace any parts not in
the kit, older the current part number called for in the lat-
est Parts manual.
Abbreviations
Callout
Typical
Part No.
Typical Part Description Part Disposition
119-190D HANDLE Removed and re-installed.
119-192D STEP Re-installed if removed.
119-272H SEED & SGS WALKBOARD WELDMENT Not re-used if removed.
133-045D SGS BOX SUPPORT STRAP Re-installed if removed.
802-007C HHCS 5/16-18X3/4 GR5 Removed and re-installed.
802-079C HHCS 3/8-16X1 1/4 GR5 Re-installed if removed.
802-091C HHCS 1/2-13X1 1/2 GR5 Re-installed if removed.
802-203C HFSS 1/2-13X1 1/2 GR5 Removed and re-installed.
803-008C NUT HEX 5/16-18 PLT Removed and re-installed.
803-014C NUT HEX 3/8-16 PLT Re-installed if removed.
803-020C NUT HEX 1/2-13 PLT Re-installed if removed.
803-169C NUT HEX FLG. LOCK 1/2-13 PLT. Removed and re-installed.
804-009C WASHER LOCK SPRING 5/16 PLT Removed and re-installed.
804-013C WASHER LOCK SPRING 3/8 PLT Re-installed if removed.
804-015C WASHER LOCK SPRING 1/2 PLT Re-installed if removed.
890-153C SMV MOUNTING BLADE Removed and re-installed.
##T Tooth count NG Native Grass
3P Three Point (hitch) NO. Number
ASSY Assembly NT No Till
BRG Bearing OD Outside Diameter
F/ Fits PLT Plated
FLG Flanged RHSNB Round Head Shank Neck Bolt
G.B. Gear Box SAE Society of Automotive Engineers (std.)
GR5 Grade 5 SGS Small Grass Seeds
HEX Hexagonal SLT Slotted
HHCS Hex Head Cap Screw (Bolt) SPH Spherical
ID Inside Diameter SPKT Sprocket
INS Inside SS Set Screw
K.W. Keyway THD CT Thread Cutting (self-tapping)
LCK Lock (collar) USS United States Standard (HD std.)
MST Metric Spherical Two-hole W/ with
X by
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96