Express-down window, Express-up window, Programming the power windows – Cadillac 2008 CTS User Manual

Page 101: Express window anti-pinch feature

Advertising
background image

Express-Down Window

This feature is on all windows. Press the switch to the
second position and release the switch to activate
the express-down feature. To stop the window as it is
lowering, pull up briefly on the switch again.

Express-Up Window

This feature is on the front windows. Pull the switch up
to the second position and release the switch to
activate the express-up feature. To stop the window as
it is raising, pull up or press down briefly on the
switch again.

Programming the Power Windows

If the battery on your vehicle has been recharged,
disconnected, or is not working, you will need to
reprogram each front power window for the express-up
feature to work. Before reprogramming, you will need
to replace or recharge your vehicle’s battery.

To program each front window, follow these steps:

1. With the ignition in ACC/ACCESSORY, ON/RUN, or

when Retained Accessory Power (RAP) is active,
close all doors.

2. Press and hold the power window switch until the

window is fully open.

3. Pull the power window switch up until the window is

fully closed.

4. Continue holding the switch up for approximately

two seconds after the window is completely
closed.

The window is now reprogrammed. Repeat the process
for the other windows.

Express Window Anti-Pinch Feature

If any object is in the path of the window when
the express-up is active, the window will stop at the
obstruction and auto-reverse to a preset factory position.
Weather conditions such as severe icing may also
cause the window to auto-reverse. The window
will return to normal operation once the obstruction or
condition is removed.

2-25

Advertising