CREATIVE PC-CAM 600 - Manual (Page 22)

Installing PC-CAM 600 10
5. Connect PC-CAM 600’s USB cable to an available USB port on your computer (see
Figure 1-4). Windows automatically detects the device.
i. If you are prompted to insert the Windows 98 CD, replace the PC-CAM 600 Installation
CD with the appropriate CD.
Note: Windows 98 is available in various editions. Be sure to use the correct edition for
your computer.
ii. In the Insert Disk dialog box, click the OK button.
iii. Follow the instructions on the screen.
• The USB port(s) of certain
computers may be found
on the front panel instead
of the back panel.
• You can also attach the
camera to a self-powered
USB hub.
• You can connect the
camera while the computer
is switched on.
Figure 1-4: Connecting PC-CAM 600 to the computer.
USB cable
USB port