Safety decals, Safety reflectors and decals, Transport decals – Great Plains 7336 DH Operator Manual User Manual
Page 9: 055c slow moving vehicle reflector, 614c red reflectors
Great Plains Manufacturing, Inc.
Important Safety Information
5
2014-06-30
556-235M
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request
corresponding safety decals.
Transport Decals
818-055C
Slow Moving Vehicle Reflector
On rear of wing stop;
1 total
838-614C
Red Reflectors
On rear face of light bracket mount tube (top); and Rear
of Wing Stop on Models 7330, 7333, & 7336 (outside)
2 total - Models 7323-7329
4 total - Models 7330-7336
To install new decals:
1.
Clean the area on which the decal is to be placed.
2.
Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
43367
43408