Introduction, Models covered, Description of unit – Great Plains 2SF30 Operator Manual User Manual
Page 14: Intended usage, Document family, Using this manual, Definitions, Introduction models covered description of unit, Document family using this manual, Models covered description of unit
155-015M-A
2014-01-09
10
2SF24/30
Great Plains Manufacturing, Inc.
Introduction
Great Plains welcomes you to its growing family of new
product owners. The 2SF24 and 2SF30 have been
designed with care and built by skilled workers using
quality materials. Proper setup, maintenance, and safe
operating practices will help you get years of satisfactory
use from the machine.
Models Covered
Description of Unit
The 2SF24/30 Drill is a towed precision planting
implement for use in conventional till conditions. The
2SF24/30 features fluted feed cups and a ground-driven
metering system to provide accurate simple seeding with
offset double-disk openers that provide superior
penetration.
Intended Usage
Use the 2SF24 and 2SF30 drill to seed
production-agriculture crops only. Do not modify the drill
for use with attachments other than Great Plains options
and accessories specified for use with the 2SF24 and
2SF30.
Document Family
Using This Manual
This manual will familiarize you with safety, assembly,
operation, adjustments, troubleshooting, and
maintenance. Read this manual and follow the
recommendations to help ensure safe and efficient
operation.
The information in this manual is current at printing.
Some parts may change to assure top performance.
Definitions
The following terms are used throughout this manual.
A crucial point of information related to the preceding topic.
Read and follow the directions to remain safe, avoid serious
damage to equipment and ensure desired field results.
Note: Useful information related to the preceding topic.
Right-hand and left-hand as used in
this manual are determined by facing
the direction the machine will travel
while in use unless otherwise stated.
An orientation rose shows the
directions of: Up, Back, Left, Down,
Front, Right.
2SF24-4806
48-Row,6 inch(15cm)
2SF24-4007
40-Row,7 inch(17.8cm)
2SF24-3875
38-Row,7.5 inch(19cm)
2SF24-3608
36-Row,8 inch(20cm)
2SF24-2810
28-Row,10 inch(25.4cm)
2SF30-6006
60-Row,6 inch(15cm)
2SF30-5207
52-Row,7 inch(17.8cm)
2SF30-4875
48-Row,7.5 inch(19cm)
2SF30-4408
44-Row,8 inch(20cm)
2SF30-3610
36-Row,10 inch(25.4cm)
Figure 1
Two Section Folding Drill
36149
L
R
U
D
F
B
L
R
155-015M-A
Owner’s Manual (this document)
155-015P
Parts manual
U
D
F
B
L
R