Canon A400 User Manual
Page 100
98
Various Functions
z
All procedures performed with a
connection to a USB 2.0 compliant
board are not guaranteed.
1
Install the driver and the software
applications bundled on the
Canon Digital Camera Solution
Disk (first time only).
z
Please see the Canon Digital Camera
Software Starter Guide Disk for the
installation procedures.
2
Use the supplied interface cable
to connect the computer's USB
port to the camera's DIGITAL
terminal.
USB
port
Interface cable
3
Set the camera's mode switch to
.
4
Press the ON/OFF button until the
upper indicator lights green.
z
Windows J
Proceed to steps 4 and 5
below.
z
Macintosh J Refer to the Canon Digital
Camera Software Starter
Guide Disk and download
images.
DIGITALTerminal
1.Open the terminal
cover with your
finger nail.
2.Insert the connector
with
facing
up.
Always grasp the
connector’s sides to
remove the interface
cable from the
camera's DIGITAL
terminal.