Canon A400 - Manual (Page 115)

113
List of Messages
Corrupted data You attempted to play back an image with corrupted data.
RAW You attempted to play back an image recorded in the RAW format.
Unidentified Image
You attempted to play back an image that was recorded in a special format
(proprietary format used by the camera of another manufacturer) or a movie
that was taken with another camera.
Cannot magnify!
You attempted to magnify an image which was photographed with another
camera, recorded in a different format, or edited on a computer or a movie
clip.
Cannot rotate!
You attempted to rotate an image which was photographed with another
camera, recorded in a different format, or edited on a computer or a movie
clip.
Incompatible WAVE
format
A sound memo cannot be added to this image since the format of the existing
sound memo is incorrect.
Cannot register this
image!
You attempted to register an image recorded with another camera or a movie
clip as a start-up image.
Protected! You attempted to erase protected image or movie clip.
Too many marks!
Too many images have been marked for printing or transferring. Cannot
process any more.
Cannot mark image You attempted to set the print settings for a non-JPEG file.
Exx
Camera malfunctioned. Turn off the power and turn on again, then re-shoot or
play back. If the same message recurs frequently, the camera may be
damaged. Note down the error number [xx] and take the camera to a
Customer Support Help Desk. If this message appears immediately after you
have taken a shot, the camera may not have shot the image. Switch to the
Playback mode and check whether the image was actually recorded.