Canon DC210 - Manual (Page 18)

18 Getting to Know the Camcorder
Disc operation
Record, Record pause,
Playback, Playback pause,
Fast playback,
Fast reverse playback,
Slow playback,
Slow reverse playback
Remaining recording time
When there is no more disc space
available, “
END” will be displayed and
the recording will stop.
Recording reminder
The camcorder counts from 1 to 10
seconds when you start recording. This is
helpful to avoid scenes that are too short.
Number of still images available on the
disc
flashing in red: No disc
in green: 6 or more images
in yellow: 1 to 5 images
in red: No more images can be
recorded
• When viewing the still images, the
display will always be in green.
• Depending on the recording conditions,
the number of available still images
displayed may not decrease even after a
recording has been made, or may
decrease by 2 still images at once.
Disc access display
“ ” is displayed next to the number of
images available while the camcorder is
writing on the disc.
Remaining battery charge estimate
• When “ ” starts flashing in red replace
the battery pack with a fully charged one.
• When you attach an empty battery pack,
the power may turn off without displaying
“
”.
• Depending on the conditions under
which the camcorder and the battery pack
are used, the actual battery charge may
not be indicated accurately.
D121C_E_Chap01-3.fm Page 18 Wednesday, January 17, 2007 10:03 AM